X-Rite Eye-one Pro UV
Article number: 42329
Listed in category: Measurement / Spectrophotometer > X-Rite Eye-one Pro UV from brakensiek.de
X-Rite Eye-one Pro
Unlocked modules:
[X] Monitor
The following modules can be unlocked, the actual unlocked modules mentioned above.
[ ] Scanner
[ ] Monitor
[ ] Printer
[ ] Printer RGB
[ ] Printer CMYK
[ ] Beamer
[ ] Printer Easy RGB
[ ] Printer Easy CMYK
[ ] Digicam
[ ] Editor
Technical specifications for i1Pro device
Spectral measurement device, supported measurement modes: Reflectance single measurement
Reflectance scanning measurement with automatic patch detection
Emission: radiance measurement
(monitor measurement)
Emission: irradiance measurement (light measurement)
Spectral analyzer: Holographic diffraction grating with
128 pixel diode array
Optical resolution: 10nm
Physical sampling interval: 3.5nm
Spectral data: Range: 380 ... 730 nm in 10nm steps
Measurement aperture: 4.5mm diameter
Interface: USB 1.1
Measurement geometry: 45°/0° ring illumination optics, DIN 5033
Light source: Gas filled tungsten (Type A)
Physical filters: No or UV cut (Filters not exchangeable)
Inter-instrument agreement: Average DE*94 0.4, max. DE*94 1.0
(Deviation from X-Rite manufacturing
standard at 23°C for single measurement mode on 12 BCRA tiles (D50,2°)
Short-term repeatability: DE*94 <= 0.1 (D50,2°), with respect to the mean
CIELab value of 10 measurements every
3 seconds on white
Data format: Spectral radiance (mW/nm/m2 /sr); Luminance Y (cd/m2)
Measurement range: 0.2 ... 300 cd/m2
Short-term repeatability: x,y: +/- 0.002 typical (CRT 5000°K, 80 cd/m2)
Type: Cosine-corrected diffuse light measurement head
Diameter: 6.0 mm
Data format: Spectral irradiance (mw/nm/m2), Illuminance Y (lux)
Power supply: Device powered by USB. No additional charger or battery required.
USB 1.1 high power device.
Unlocked modules:
[X] Monitor
The following modules can be unlocked, the actual unlocked modules mentioned above.
[ ] Scanner
[ ] Monitor
[ ] Printer
[ ] Printer RGB
[ ] Printer CMYK
[ ] Beamer
[ ] Printer Easy RGB
[ ] Printer Easy CMYK
[ ] Digicam
[ ] Editor
Technical specifications for i1Pro device
Spectral measurement device, supported measurement modes: Reflectance single measurement
Reflectance scanning measurement with automatic patch detection
Emission: radiance measurement
(monitor measurement)
Emission: irradiance measurement (light measurement)
Spectral analyzer: Holographic diffraction grating with
128 pixel diode array
Optical resolution: 10nm
Physical sampling interval: 3.5nm
Spectral data: Range: 380 ... 730 nm in 10nm steps
Measurement aperture: 4.5mm diameter
Interface: USB 1.1
Measurement geometry: 45°/0° ring illumination optics, DIN 5033
Light source: Gas filled tungsten (Type A)
Physical filters: No or UV cut (Filters not exchangeable)
Inter-instrument agreement: Average DE*94 0.4, max. DE*94 1.0
(Deviation from X-Rite manufacturing
standard at 23°C for single measurement mode on 12 BCRA tiles (D50,2°)
Short-term repeatability: DE*94 <= 0.1 (D50,2°), with respect to the mean
CIELab value of 10 measurements every
3 seconds on white
Data format: Spectral radiance (mW/nm/m2 /sr); Luminance Y (cd/m2)
Measurement range: 0.2 ... 300 cd/m2
Short-term repeatability: x,y: +/- 0.002 typical (CRT 5000°K, 80 cd/m2)
Type: Cosine-corrected diffuse light measurement head
Diameter: 6.0 mm
Data format: Spectral irradiance (mw/nm/m2), Illuminance Y (lux)
Power supply: Device powered by USB. No additional charger or battery required.
USB 1.1 high power device.
gebrauchtprodukt
last update:
21.11.2012