Glunz & Jensen InterPlater 66 P plate processor Yom 2006
Article number: 40302
Listed in category: Prepress / Computer To Plate / Plateprocessors > Glunz & Jensen InterPlater 66 P plate processor Yom 2006 from brakensiek.de
Glunz & Jensen InterPlater 66 P plate processor
Category: CTP - Platesetters -> Plateprocessors and Punches
Manufacturer: Glunz & Jensen
Not-New
Year 2006
Information:
The processor 66 can Interplater positive (P version) and negative (N version) one-sided offset plates in widths up to develop 660 mm.
By using the standards of the "Soft Nylon Brush" - technology that can edit Interplater 66 each available on the market records.
The machine can be built and installed in an hour.
The height and length of the output can be adjusted easily to his needs by the operator.
Key features:
High quality
- The unique feed system transports the film precisely in the developer
- No scratches possible
- Proven technology
- Possible without mixing the liquids during the development of the film
Flexible
- Works with all standard film types that are available on the market
- Develop positive and negative one-sided offset plates
Efficient
- The closed immersion reduce the consumption of chemicals due to the reduced evaporation
- Anti-evaporation lid
- Precise replenishment system which is constantly adjusted by system data
Ease of use
- Auto Replenishing System
- Easy operation by control panel
- Easy to adjust parameters
Maintenance
- Automatic self Gummierungseinheit
- Lightweight and easy to clean rack modules
- No tool for the rollers, brushes and bearings needed to remove
- Design easy to maintain
Technical data:
InterPlater 66/88
Positive and negative plate materials single-sided offset plates
Processing speed 40-140 cm / min. (16-55 "/ min.)
Material width, min 10 cm (4 ")
Material width, max 66 / 88 cm (26 "/ 34.6")
Material length, min 330 mm (13.0 ")
Material thickness 0.15 mm (0.006 ") - 0.4 mm (0.016")
Tank contents, developer 18 liters (4.75 gal U.S. gal) / 24 l (6.34 U.S.)
Tank contents, gum Recirculating from container
Adjustable temperature, developer 18-40 ° C (64.4-104 ° F) A cooling unit is recommended under certain conditions.
Adjustable temperature, dryer 30-60 ° C (86-140 ° F)
Brush speed 40-140 rpm
Filter 1 x 10 "
Water supply tap water, pressure min. 1 bar/15 psi
Water consumption in Op max. 7.0 l / min. (1.85 U.S. gal / min)
Wash Tap water
Diameter of rollers 40 mm (1.6 ")
Automatic Replenishment
Area replenishment amount 000-500 ml/m2 ± 5% (0-0132 gal/m2 ± 5%)
Level Control Yes
Warm up time max., Developer min 0.3 ° C /. (Min 0.86 ° F /.
Power 230 V, 1 phase, 50/60 Hz
Power consumption, max 2.2 kW
At 230 V Voltage tolerance: + 10% - 15% (208-240 V)
Start sensor operated
Weight, empty 125 / 150 kg (276/331 lb)
Approvals UL, c-UL, and GOST-R certified. Complies with CE standards.
Category: CTP - Platesetters -> Plateprocessors and Punches
Manufacturer: Glunz & Jensen
Not-New
Year 2006
Information:
The processor 66 can Interplater positive (P version) and negative (N version) one-sided offset plates in widths up to develop 660 mm.
By using the standards of the "Soft Nylon Brush" - technology that can edit Interplater 66 each available on the market records.
The machine can be built and installed in an hour.
The height and length of the output can be adjusted easily to his needs by the operator.
Key features:
High quality
- The unique feed system transports the film precisely in the developer
- No scratches possible
- Proven technology
- Possible without mixing the liquids during the development of the film
Flexible
- Works with all standard film types that are available on the market
- Develop positive and negative one-sided offset plates
Efficient
- The closed immersion reduce the consumption of chemicals due to the reduced evaporation
- Anti-evaporation lid
- Precise replenishment system which is constantly adjusted by system data
Ease of use
- Auto Replenishing System
- Easy operation by control panel
- Easy to adjust parameters
Maintenance
- Automatic self Gummierungseinheit
- Lightweight and easy to clean rack modules
- No tool for the rollers, brushes and bearings needed to remove
- Design easy to maintain
Technical data:
InterPlater 66/88
Positive and negative plate materials single-sided offset plates
Processing speed 40-140 cm / min. (16-55 "/ min.)
Material width, min 10 cm (4 ")
Material width, max 66 / 88 cm (26 "/ 34.6")
Material length, min 330 mm (13.0 ")
Material thickness 0.15 mm (0.006 ") - 0.4 mm (0.016")
Tank contents, developer 18 liters (4.75 gal U.S. gal) / 24 l (6.34 U.S.)
Tank contents, gum Recirculating from container
Adjustable temperature, developer 18-40 ° C (64.4-104 ° F) A cooling unit is recommended under certain conditions.
Adjustable temperature, dryer 30-60 ° C (86-140 ° F)
Brush speed 40-140 rpm
Filter 1 x 10 "
Water supply tap water, pressure min. 1 bar/15 psi
Water consumption in Op max. 7.0 l / min. (1.85 U.S. gal / min)
Wash Tap water
Diameter of rollers 40 mm (1.6 ")
Automatic Replenishment
Area replenishment amount 000-500 ml/m2 ± 5% (0-0132 gal/m2 ± 5%)
Level Control Yes
Warm up time max., Developer min 0.3 ° C /. (Min 0.86 ° F /.
Power 230 V, 1 phase, 50/60 Hz
Power consumption, max 2.2 kW
At 230 V Voltage tolerance: + 10% - 15% (208-240 V)
Start sensor operated
Weight, empty 125 / 150 kg (276/331 lb)
Approvals UL, c-UL, and GOST-R certified. Complies with CE standards.
Contact:
Your contact person: Tim Brakensiek
gebrauchtprodukt
last update:
23.11.2012