Gossen METRAWATT Werkstattprueftafel SECUTEST 10P DIN VDE 701 sowie 702 Vermietung Standort Dortmund
Article number: 35839
Listed in category: Measurement / Wire and Cables > Gossen METRAWATT Werkstattprueftafel SECUTEST 10P DIN VDE 701 sowie 702 Vermietung Standort Dortmund from brakensiek.de
Gossen METRAWATT workshop test SECUTEST 10P
Non-new
recalibrated on 16/05/2008 from GMC-I Gossen Metrawatt
The next calibration is due on 31/05/2009
The internal name is M5013 Secutest 10P
Thus, the device is ready for immediate use!
This device may DIN VDE 701 and DIN VDE 702 trained staff in our company on a daily rate of 150 EUR plus VAT. . rent Consumers can not rent the unit. We are based in Dortmund. We have procured the equipment, because we have no place in Dortmund and surrounding electrical contractor that could fit our needs to perform the corresponding decrease according to DIN VDE 701 and DVE 702nd
The original price including all accessories amounted to approximately 4500 EUR plus VAT.
Workshop test panel according to DIN VDE 0104
Fixtures including Z745W VL2E
including cable set KS 13
including AC Adaptor 16A CEE socket to Schuko plug
• for testing devices according to DIN VDE 0701 and 0702
• Equipped with the Einbauprüfgerät METRATESTER 4 with visual and audible notification threshold and differential current measurement according to DIN VDE 0702
• testing of extension cables via adapter (optional)
Safe to use
All measurements according to DIN VDE 0701 Part 1 ... 240,
To DIN VDE 0702 part 1 and DIN VDE 0105 very efficiently to
mono-or three-phase operation means are performed.
• RCCB 4 pole 25 A 0.03 A
• Reliable protection conductor test
(Disconnection at the VDE test according to DIN VDE 0404)
• Reading of VDE and Funktionsprüfwerte on the display
• Emergency-Off switch with undervoltage release
• VDE-NETWORK-examination without repositioning of the specimens
Applicable Regulations and Standards
Guidelines for the VDEW ZVEH and workshop equipment
of electrical installers
DIN VDE 0104: installation and operation of electrical test
DIN VDE 0404: Devices for technical safety inspection of
electrical equipment
61010-1/EN IEC 61010-1 / VDE 0411-1:
Safety requirements for electrical equipment for measurement, control, and laboratory equipment
EN 60529 VDE 0470 Part 1:
Test equipment and test methods
Protection provided by enclosures (IP Code)
EN 50081-1: Electromagnetic compatibility (EMC)
Trade emission standard
EN 50082-1: Electromagnetic compatibility (EMC)
Generic standard for interference immunity
Non-new
recalibrated on 16/05/2008 from GMC-I Gossen Metrawatt
The next calibration is due on 31/05/2009
The internal name is M5013 Secutest 10P
Thus, the device is ready for immediate use!
This device may DIN VDE 701 and DIN VDE 702 trained staff in our company on a daily rate of 150 EUR plus VAT. . rent Consumers can not rent the unit. We are based in Dortmund. We have procured the equipment, because we have no place in Dortmund and surrounding electrical contractor that could fit our needs to perform the corresponding decrease according to DIN VDE 701 and DVE 702nd
The original price including all accessories amounted to approximately 4500 EUR plus VAT.
Workshop test panel according to DIN VDE 0104
Fixtures including Z745W VL2E
including cable set KS 13
including AC Adaptor 16A CEE socket to Schuko plug
• for testing devices according to DIN VDE 0701 and 0702
• Equipped with the Einbauprüfgerät METRATESTER 4 with visual and audible notification threshold and differential current measurement according to DIN VDE 0702
• testing of extension cables via adapter (optional)
Safe to use
All measurements according to DIN VDE 0701 Part 1 ... 240,
To DIN VDE 0702 part 1 and DIN VDE 0105 very efficiently to
mono-or three-phase operation means are performed.
• RCCB 4 pole 25 A 0.03 A
• Reliable protection conductor test
(Disconnection at the VDE test according to DIN VDE 0404)
• Reading of VDE and Funktionsprüfwerte on the display
• Emergency-Off switch with undervoltage release
• VDE-NETWORK-examination without repositioning of the specimens
Applicable Regulations and Standards
Guidelines for the VDEW ZVEH and workshop equipment
of electrical installers
DIN VDE 0104: installation and operation of electrical test
DIN VDE 0404: Devices for technical safety inspection of
electrical equipment
61010-1/EN IEC 61010-1 / VDE 0411-1:
Safety requirements for electrical equipment for measurement, control, and laboratory equipment
EN 60529 VDE 0470 Part 1:
Test equipment and test methods
Protection provided by enclosures (IP Code)
EN 50081-1: Electromagnetic compatibility (EMC)
Trade emission standard
EN 50082-1: Electromagnetic compatibility (EMC)
Generic standard for interference immunity
Contact:
Your contact person: Tim Brakensiek
gebrauchtprodukt
last update:
21.11.2012