Heidelberg Primesetter 102
Article number: 34307
Listed in category: Prepress / Computer To Film / Imagesetter > Heidelberg Primesetter 102 from brakensiek.de
Heidelberg PrimeSetter 102
Not-New, without packacking, ex works
Max. imaging format 770x1070mm (30.3x42.1 inch)
Inclusive Bacher punch
Inclusive 8-up input cassette
Inclusive OLP processor
Inclusive Heidelberg Delta Tower
Imaging principle: Indrum principal, laser beam deflected by a rotating, air-cushioned prism
Light source: Laser diode emitting at 658 nm ±10, laser class 1
Scanning line length: 770 mm (internal drum circumference)
Resolution: Metric/inch
Spot sizes: Matched to the selected resolution of the Primesetter, minimum 12 µm, maximum 20 µm
Max. screen frequency: Film imaging: up to 120 lines/cm (305 lpi), Polyester printing plates: up to 70 lines/cm ( 187 lpi)
Repeat accuracy: ±5 µm over full format and eight films (color set) imaged in direct succession and ignoring distortion of photographic
material caused by changes in temperature and humidity
Output options: Positive, negative, right-reading and wrong-reading; Duplo, Double-Duplo and Quadro
Photographic material: Film, polyester printing plates 0.1 – 0.3mm, in roll form: thick; sensitive to light emissions at 650 – 670 nm
Material specifications: Core diameter 72mm with special side flanges; emulsion outside; special packaging for inserting into the supply cassette during daylight operation
Capacity of supply cassette: Max. 75 m of 0.10mm-thick photographic material, dependent on material
Interfaces: SpeedWayR interface
Voltage: 115 or 230VAC
Power consumption: 0.7 kW at 115 and 230 V
Ambient temperature: +18°C to +28°C
Humidity: 45 – 80%, non-condensing
Not-New, without packacking, ex works
Max. imaging format 770x1070mm (30.3x42.1 inch)
Inclusive Bacher punch
Inclusive 8-up input cassette
Inclusive OLP processor
Inclusive Heidelberg Delta Tower
Imaging principle: Indrum principal, laser beam deflected by a rotating, air-cushioned prism
Light source: Laser diode emitting at 658 nm ±10, laser class 1
Scanning line length: 770 mm (internal drum circumference)
Resolution: Metric/inch
Spot sizes: Matched to the selected resolution of the Primesetter, minimum 12 µm, maximum 20 µm
Max. screen frequency: Film imaging: up to 120 lines/cm (305 lpi), Polyester printing plates: up to 70 lines/cm ( 187 lpi)
Repeat accuracy: ±5 µm over full format and eight films (color set) imaged in direct succession and ignoring distortion of photographic
material caused by changes in temperature and humidity
Output options: Positive, negative, right-reading and wrong-reading; Duplo, Double-Duplo and Quadro
Photographic material: Film, polyester printing plates 0.1 – 0.3mm, in roll form: thick; sensitive to light emissions at 650 – 670 nm
Material specifications: Core diameter 72mm with special side flanges; emulsion outside; special packaging for inserting into the supply cassette during daylight operation
Capacity of supply cassette: Max. 75 m of 0.10mm-thick photographic material, dependent on material
Interfaces: SpeedWayR interface
Voltage: 115 or 230VAC
Power consumption: 0.7 kW at 115 and 230 V
Ambient temperature: +18°C to +28°C
Humidity: 45 – 80%, non-condensing
purchase list
last update:
21.11.2012