VCS50 VeriColor solo
Article number: 31642
Listed in category: Measurement / Remission-Densitometer > VCS50 VeriColor solo from brakensiek.de
VCS50 VeriColor ® solo
- Communication via RS232 Serial port and discrete
- 8-pin input and output
- Storage of up to 30 standards
- User-friendly software
Such a reliable and yet affordable tool for the Color can come only from the leading companies in the color science.
Consistently consistent color is an integral component of the overall quality of a product. This is especially true for industrial production environments of today: Here is an efficient system to reduce chromatic aberration of crucial importance. VeriColor ® Solo aufbewährter builds on technology from X-Rite ®. Suppliers of automotive components, and the coatings, plastics, textile and other industries around the world rely on this technology, when it comes to identify colors in their industrial assembly and sorting operations.
Take control of your colors with VeriColor ® Solo.
High spectral resolution for more precise Colour identification
VeriColor solo recognizes more detailed color information than any other industrial sensor system. A full-spectrum lighting system detects subtle color differences on various surfaces and can not be mislead by metamerism, ie situations in which different colors look under certain lighting conditions the same.
Non-contact measurement
VeriColor Solo is a non-contact measuring device when measuring different distances intermediate devices and objects as well as compensate for irregularities and bends can take into account the surface. Thanks to the contactless measurement method, the system is extremely flexible and practical. Therefore, it is ideal for use in extremely varied applications.
Unaffected by ambient light
With VeriColor solo work, you must not change the lighting and install any special sunscreen that protects the sensors of the system from ambient light. The system provides for all light conditions for precise, repeatable measurements.
Data storage for up to 30 active colors at once
VeriColor Solo can not only distinguish between thousands of colors, but also store information for up to 30 active colors at once. Hence, the Farbprogrammierung not be made again and again and users can check colors on an appropriate color palette of time.
Reliability in design and performance
VeriColor solo ensures a consistent level of performance without complex maintenance procedures and without constant readjustment. In order to prevent-the service should only Sen sorlinsen be kept clean.
Withstands harsh industrial conditions
VeriColor Solo is designed to heat, cold, to resist moisture, shock and contaminants, as they usually can occur in industrial environments.
Graphic tolerances
VeriColor solo offers an easily readable, clear graphical view of the findings. Tolerances that determine the applicability of color are represented graphically.
Optical color differences
VeriColor Solo offers intuitive color charts, which make possible a determination of color differences.
Log file access
VeriColor solo works with a log file that is designed to view and manage the measured data easily.
Standard actimetry
VeriColor Solo allows easy adjustment to the standard production after the initial setup. New measurements can be added at any time, hidden or deleted.
Easy setup
VeriColor Solo can be set up without any problem.
- Communication: RS232 and software-specific device.
- PLC interface: Basic requirements for the majority of the projects by specific inputs and outputs are provided, which simplifies programming considerably.
Alignment tool: This tool ensures the correct distance and angle of the sensor to the DUT.
Technical data
General
Types of instruments:
High-resolution, reflective color
Geometry:
0 ° / 30 ° or 30 ° / 0 ° (details below to 30 ° / 0 ° base)
Range:
12 mm
Difference in color resolution:
0.25 ÆLED, typical (ÆLED is an internal FarbunterschiedsBerechnung, based on the VeriColor LED color reaction and in the scaling of small color differences AEE * CIE is similar.)
Operating temperature:
00-50 ° C
Moisture level:
00-90% non-condensing
Umschließungsvorgabe:
Analog NEMA 4/IP56
Dimensions:
L: 13 cm, W: 7.4 cm, H: 3.3 cm
Weight:
347 g
Power supply:
24 V DC ± 10% at 250 mA max.
Performance
Black and reproducibility:
0.3 ÆLED 00-40 ° C1
(10 measurements to 3-second intervals on
1% reflective black)
White Reproducibility:
0.1 ÆLED 00-40 ° C 1
(10 measurements to 3-second intervals on
99% reflective white)
Measuring distance:
35 mm ± 5 mm
Measurement time:
250 ms
Time Clock:
1 sec (interval between measurement runs)
Warm up time:
30 sec typical at 23 ° C
Calibration:
Review recommended - 90 days / 0.5 million readouts
(Whichever comes first). More frequent inspections are necessary
required if the system does not suitably clean
is held.
Lifetime of LED lamp:
Life of the unit
Product life:
at least five years
Vibration:
5 to 10 Hz 0.200 "displacement peak - peak
10 -100 Hz at 1 G
Shock:
Serviceable at amplitudes of 15 g and a duration
18 ms
Inoperable g at amplitudes of 30 and
a duration of 11 ms
Environment
Use:
Only in enclosed spaces
Height:
to 2000 m
Air pollution:
Grade 2
Voltage:
Category II
Security target
Underwriters Laboratories UL 61010-1
Canadian Standards Assn. CSA 22.2 No. 1010.1-92
International Electrotechnical
Committee IEC (EN) 61010-1
- Communication via RS232 Serial port and discrete
- 8-pin input and output
- Storage of up to 30 standards
- User-friendly software
Such a reliable and yet affordable tool for the Color can come only from the leading companies in the color science.
Consistently consistent color is an integral component of the overall quality of a product. This is especially true for industrial production environments of today: Here is an efficient system to reduce chromatic aberration of crucial importance. VeriColor ® Solo aufbewährter builds on technology from X-Rite ®. Suppliers of automotive components, and the coatings, plastics, textile and other industries around the world rely on this technology, when it comes to identify colors in their industrial assembly and sorting operations.
Take control of your colors with VeriColor ® Solo.
High spectral resolution for more precise Colour identification
VeriColor solo recognizes more detailed color information than any other industrial sensor system. A full-spectrum lighting system detects subtle color differences on various surfaces and can not be mislead by metamerism, ie situations in which different colors look under certain lighting conditions the same.
Non-contact measurement
VeriColor Solo is a non-contact measuring device when measuring different distances intermediate devices and objects as well as compensate for irregularities and bends can take into account the surface. Thanks to the contactless measurement method, the system is extremely flexible and practical. Therefore, it is ideal for use in extremely varied applications.
Unaffected by ambient light
With VeriColor solo work, you must not change the lighting and install any special sunscreen that protects the sensors of the system from ambient light. The system provides for all light conditions for precise, repeatable measurements.
Data storage for up to 30 active colors at once
VeriColor Solo can not only distinguish between thousands of colors, but also store information for up to 30 active colors at once. Hence, the Farbprogrammierung not be made again and again and users can check colors on an appropriate color palette of time.
Reliability in design and performance
VeriColor solo ensures a consistent level of performance without complex maintenance procedures and without constant readjustment. In order to prevent-the service should only Sen sorlinsen be kept clean.
Withstands harsh industrial conditions
VeriColor Solo is designed to heat, cold, to resist moisture, shock and contaminants, as they usually can occur in industrial environments.
Graphic tolerances
VeriColor solo offers an easily readable, clear graphical view of the findings. Tolerances that determine the applicability of color are represented graphically.
Optical color differences
VeriColor Solo offers intuitive color charts, which make possible a determination of color differences.
Log file access
VeriColor solo works with a log file that is designed to view and manage the measured data easily.
Standard actimetry
VeriColor Solo allows easy adjustment to the standard production after the initial setup. New measurements can be added at any time, hidden or deleted.
Easy setup
VeriColor Solo can be set up without any problem.
- Communication: RS232 and software-specific device.
- PLC interface: Basic requirements for the majority of the projects by specific inputs and outputs are provided, which simplifies programming considerably.
Alignment tool: This tool ensures the correct distance and angle of the sensor to the DUT.
Technical data
General
Types of instruments:
High-resolution, reflective color
Geometry:
0 ° / 30 ° or 30 ° / 0 ° (details below to 30 ° / 0 ° base)
Range:
12 mm
Difference in color resolution:
0.25 ÆLED, typical (ÆLED is an internal FarbunterschiedsBerechnung, based on the VeriColor LED color reaction and in the scaling of small color differences AEE * CIE is similar.)
Operating temperature:
00-50 ° C
Moisture level:
00-90% non-condensing
Umschließungsvorgabe:
Analog NEMA 4/IP56
Dimensions:
L: 13 cm, W: 7.4 cm, H: 3.3 cm
Weight:
347 g
Power supply:
24 V DC ± 10% at 250 mA max.
Performance
Black and reproducibility:
0.3 ÆLED 00-40 ° C1
(10 measurements to 3-second intervals on
1% reflective black)
White Reproducibility:
0.1 ÆLED 00-40 ° C 1
(10 measurements to 3-second intervals on
99% reflective white)
Measuring distance:
35 mm ± 5 mm
Measurement time:
250 ms
Time Clock:
1 sec (interval between measurement runs)
Warm up time:
30 sec typical at 23 ° C
Calibration:
Review recommended - 90 days / 0.5 million readouts
(Whichever comes first). More frequent inspections are necessary
required if the system does not suitably clean
is held.
Lifetime of LED lamp:
Life of the unit
Product life:
at least five years
Vibration:
5 to 10 Hz 0.200 "displacement peak - peak
10 -100 Hz at 1 G
Shock:
Serviceable at amplitudes of 15 g and a duration
18 ms
Inoperable g at amplitudes of 30 and
a duration of 11 ms
Environment
Use:
Only in enclosed spaces
Height:
to 2000 m
Air pollution:
Grade 2
Voltage:
Category II
Security target
Underwriters Laboratories UL 61010-1
Canadian Standards Assn. CSA 22.2 No. 1010.1-92
International Electrotechnical
Committee IEC (EN) 61010-1
purchase list
last update:
20.11.2012